Ga door naar hoofdinhoud

Wijzigingen aan stap #3

Bewerking door dv1977

Bewerking geweigerd door Andrew Optimus Goldheart

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] SlideYou can see a pull-tab on the point ofleft side from a spudger behindchip which is glued to the shield platesurface under it. And this pull-tab is free to take - no glue under it. Just grab it and gentky move to gently peel the right - to the chip. Iy's the easiest way to unglue this home button cable up off of the front panel.cable. No blade or other stuff needed!
[* black] SlideYou can see a pull-tab on the point ofleft side from a spudger behindchip which is glued to the shield platesurface under it. And this pull-tab is free to take - no glue under it. Just grab it and gentky move to gently peel the right - to the chip. Iy's the easiest way to unglue this home button cable up off of the front panel.cable. No blade or other stuff needed!
[* icon_caution] The home button cable is very thin, go slowly and be careful not to rip it.
[* black] Remove the LCD shield plate.