Ga door naar hoofdinhoud

Wijzigingen aan stap #3

Bewerking door Basem

Bewerking geweigerd door Adam O'Camb

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Slide the point of a spudger behind the shield METAL plate to gently peel the home button cable up off of the front panel.
[* icon_caution] Be extremely cautious as you peel the home button cable. It is a fragile cable. and a metal plate is attached to it , point the spudger tip below the metal not in between the metal and cable. If you feel more than slight resistance, stop and apply some heat from a hair dryer or iOpener to soften the adhesive, and then try again.
[* black] Slide the point of a spudger behind the shield METAL plate to gently peel the home button cable up off of the front panel.
[* icon_caution] Be extremely cautious as you peel the home button cable. It is a fragile cable. and a metal plate is attached to it , point the spudger tip below the metal not in between the metal and cable. If you feel more than slight resistance, stop and apply some heat from a hair dryer or iOpener to soften the adhesive, and then try again.
[* black] Remove the LCD shield plate.