Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #9

Bewerking door Taylor Arnicar

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] De-route the digitizer and LCD cables through the steel inner frame.
[* icon_caution] Before re-fastening the front panel to the steel inner frame, be sure both the LCD and digitizer cables are not folded or pinched between the inner frame and the front panel assembly. This will result in possibly damaging the cables and not having enough slack when reconnecting the them to the logic board.
[* icon_note] ''BothWhen the front panel has been correctly installed, both the LCD and digitizer cables should be immediately next to eachone another, and the connectors should be just hanging over the steel frame, when the front panel has been correctly installed.''frame.
[* icon_note] ''BothWhen the front panel has been correctly installed, both the LCD and digitizer cables should be immediately next to eachone another, and the connectors should be just hanging over the steel frame, when the front panel has been correctly installed.''frame.