Menu

Jouw instellingen

Mijn werkbank

Krijg snel toegang tot handleidingen, onderdelen en antwoorden voor jouw apparaten
Winkelwagen

Het lijkt erop dat je mandje leeg is

Doorblader onze winkel

Wijzigingen in stap #9

Bewerken voor klubn —

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] De-route the digitizer and LCD cables through the steel inner frame.
[* icon_remindericon_caution] Before re-fastening the front panel to the steel inner frame, be sure both the LCD and digitizer cables are not folded or pinched between the inner frame and the front panel assembly. This will result in possibly damaging the cables and not having enough slack when reconnecting the them to the logic board.
[* icon_note] ''Both the LCD and digitizer cables should be immediately next to each another, and the connectors just hanging over the steel frame, when the front panel has been correctly installed.''
[* icon_remindericon_caution] Before re-fastening the front panel to the steel inner frame, be sure both the LCD and digitizer cables are not folded or pinched between the inner frame and the front panel assembly. This will result in possibly damaging the cables and not having enough slack when reconnecting the them to the logic board.
[* icon_note] ''Both the LCD and digitizer cables should be immediately next to each another, and the connectors just hanging over the steel frame, when the front panel has been correctly installed.''