Ga door naar hoofdinhoud

Wijzigingen in stap #9

Bewerken voor Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] De-route the digitizer and LCD cables through the steel inner frameframe, and remove the display from the iPhone.
[* icon_caution] Before re-fasteningicon_reminder] When reinstalling the front panel to the steel inner frame, be sure bothdisplay, carefully straighten the digitizer and LCD data cables, and digitizer cables are not folded or pinched betweenfeed them through the inner frame andslot cut in the steel frame. [https://d3nevzfk7ii3be.cloudfront.net/igi/pOnFkdECiyCBgkjU|This photo|new_window=true] shows the front panel assembly. This will resultdisplay assembly being installed '''incorrectly''', with a fold in possibly damaging the cables and not having enough slack when reconnecting them to the logic board.
[* icon_note
digitizer cable.
[* black
] When the front panel has been correctly installedinstalled, both the LCD and digitizer cables should be immediately next to one another and should be the same length and should be just hanging overlength, as shown in the steel frame.
[* icon_note] Ensure that
second photo.
[* icon_caution] If
the cables dodigitizer cable has been installed incorrectly, it will not get caught betweenreach its socket on the screen andlogic board. '''Do not''' attempt to pull it through by force, or it will tear. Remove the frame.
[* icon_note] When replacing
display assembly, straighten the front panel assembly you must remember that you might havecable, and feed it through to reuseits full length, as shown.
[* red] During reassembly, do not touch
the earpiece grille andmetallic area at the clear plastic ring aroundbase of the front facing camera fromLCD data cable, as this can cause problems with the old/damaged assembly. This will depend on whereLCD. If you buy the replacement part.
[* icon_reminder] After reassembly, protect your new display from any scratches by installing a new [product|IF182-025|screen protector]
do touch it accidentally, clean it gently with an alcohol wipe before continuing.
[* black] De-route the digitizer and LCD cables through the steel inner frameframe, and remove the display from the iPhone.
[* icon_caution] Before re-fasteningicon_reminder] When reinstalling the front panel to the steel inner frame, be sure bothdisplay, carefully straighten the digitizer and LCD data cables, and digitizer cables are not folded or pinched betweenfeed them through the inner frame andslot cut in the steel frame. [https://d3nevzfk7ii3be.cloudfront.net/igi/pOnFkdECiyCBgkjU|This photo|new_window=true] shows the front panel assembly. This will resultdisplay assembly being installed '''incorrectly''', with a fold in possibly damaging the cables and not having enough slack when reconnecting them to the logic board.
[* icon_note
digitizer cable.
[* black
] When the front panel has been correctly installedinstalled, both the LCD and digitizer cables should be immediately next to one another and should be the same length and should be just hanging overlength, as shown in the steel frame.
[* icon_note] Ensure that
second photo.
[* icon_caution] If
the cables dodigitizer cable has been installed incorrectly, it will not get caught betweenreach its socket on the screen andlogic board. '''Do not''' attempt to pull it through by force, or it will tear. Remove the frame.
[* icon_note] When replacing
display assembly, straighten the front panel assembly you must remember that you might havecable, and feed it through to reuseits full length, as shown.
[* red] During reassembly, do not touch
the earpiece grille andmetallic area at the clear plastic ring aroundbase of the front facing camera fromLCD data cable, as this can cause problems with the old/damaged assembly. This will depend on whereLCD. If you buy the replacement part.
[* icon_reminder] After reassembly, protect your new display from any scratches by installing a new [product|IF182-025|screen protector]
do touch it accidentally, clean it gently with an alcohol wipe before continuing.

Afbeelding 2

Geen vorige afbeelding

Toegevoegd

Afbeelding 3

Geen vorige afbeelding

Toegevoegd