Wijzigingen in stap #8
Bewerken voor Jake Devincenzi —
- Verwijderd
- Toegevoegd
- Ongewijzigd
Stap regels
| [* black] Slowly and gently lift the top edge of the front panel assembly away from the steel inner frame. |
| [* black] Continue to rotate the front panel assembly away from the steel inner frame until it slowly begins to peel off the adhesive applied below the home button area. |
| [* black] It may be easiest to insert a spudger at the |
| [* black] It may be easiest to insert a spudger at the |
| [* black] Carefully pull the lower edge of the front panel assembly away from the steel inner frame. |
| [* icon_caution] Be careful, if the home button sticks to the front panel you may tear the home button cable. |
| [* |
| [* |