Ga door naar hoofdinhoud

Wijzigingen in stap #8

Bewerken voor Jake Devincenzi

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Slowly and gently lift the top edge of the front panel assembly away from the steel inner frame.
[* black] Continue to rotate the front panel assembly away from the steel inner frame until it slowly begins to peel off the adhesive applied below the home button area.
[* black] Carefully pull the lower edge of the front panel assembly away from the steel inner frame.
[* blackicon_caution] Be careful, if the home button may sticksticks to the front panel, andpanel you may tear the home button cable.
[* blackicon_caution] Be careful, if the home button may sticksticks to the front panel, andpanel you may tear the home button cable.