Ga door naar hoofdinhoud

Wijzigingen in stap #8

Bewerken voor kyounis

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Slowly and gently lift the top edge of the front panel assembly away from the steel inner frame.
[* black] Continue to rotate the front panel assembly away from the steel inner frame until it slowly begins to peel off the adhesive applied below the home button area. This may be frustrating at first, and you may not feel the screen coming out because of all the adhesive apple applies, but you need to be patient.
[* black] Continue to rotate the front panel assembly away from the steel inner frame until it slowly begins to peel off the adhesive applied below the home button area. This may be frustrating at first, and you may not feel the screen coming out because of all the adhesive apple applies, but you need to be patient.
[* black] Carefully pull the lower edge of the front panel assembly away from the steel inner frame.