Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #1

Bewerking door davidwesterfeld

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Remove the following two screws securing the vibrator to the inner frame:
[* red] One 6 mm Phillips
[* orange] One 1.4 mm Phillips
[* black] Remove the vibrator from the iPhone.
[* black] On reassembly be sure that the axis of the motor is parallel to the long side of the case. The screw holes are large enough to install the vibrator crooked, and the vibrator weight may interfere with adjacent components, blocking its movement.