Ga door naar hoofdinhoud

Wijzigingen in stap #3

Bewerken voor robin

Bewerking geweigerd door Evan Noronha

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] De-route the home button ribbon cable through the inner case and remove the home button from the iPhone.
[* icon_note] When installing a new part, there may be a protective plastic film on the home button. It can be removed with a spudger or your fingernail.
[* icon_note] When re-installing, the tab on the ribbon cable will not align with the slot. Ignore the correct seating of the button until after the tab is in the connector and locked down.