Wijzigingen aan stap #11
Bewerking door SimonB13 —
Bewerking geweigerd door Walter Galan
- Voor
- Na
- Ongewijzigd
Stap regels
| [* black] Use the edge of a plastic opening tool to gently pry the following connectors up and out of their sockets on the logic board: |
| [* red] Digitizer cable (pry from bottom) |
| [* orange] LCD cable (pry from bottom) |
| [* yellow] Headphone jack/volume button cable (pry from top) |
| [* green] Top Microphone/sleep button cable (pry from top) |
| [* blue] Front camera cable (pry from top) |
| [* black] When removing the headphone jack/volume button (yellow) be very carefull as there is a small microchip that can be knocked off with the plastic opening tool just above it to the right, if knocked off you will be unable to use front facing camera |