Wijzigingen aan stap #7
Bewerking door Lukas Selch —
Bewerking goedgekeurd door Sam Goldheart
- Voor
- Na
- Ongewijzigd
Stap regels
[* black] Remove the following five screws securing the Wi-Fi antenna |
[* black] Remove the following five screws securing the Wi-Fi antenna |
[* red] One 2.3 mm Phillips |
[* orange] Two 1.6 mm Phillips |
[* yellow] One 1.4 mm Phillips |
[* green] One 4.8 mm Phillips |
[* icon_caution] When re-assembling, start off with replacing the 4.8 mm Philips screw first, then the 2.3 mm. ''This is to ensure there is no mix-up, and avoid rendering the LCD and digitizer useless.'' |
[* icon_caution] Also make sure to put the long 4.8 mm Philips back in correctly when reassembling. This is the ground for the Wi-Fi antenna and is often the culprit if you are having bad Wi-Fi reception after reassembly. |