Wijzigingen aan stap #7
Bewerking door klubn —
- Voor
- Na
- Ongewijzigd
Stap regels
| [* black] Remove the following five screws securing the connector cover to to the logic board: |
| [* red] One 2.3 mm Phillips |
| [* orange] Two 1.6 mm Phillips |
| [* yellow] One 1.4 mm Phillips |
| [* green] One 4.8 mm Phillips |
| [* icon_caution] When re-assembling, start off with replacing the 4.8 mm Philips screw first, then the 2.3 mm. ''This is to ensure there is no mix-up, and avoid rendering the LCD and digitizer useless.'' |