Ga door naar hoofdinhoud

Wijzigingen in stap #2

Bewerken voor jonathancleghorn

Bewerking goedgekeurd door Andrew Optimus Goldheart

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Use a plastic opening tool to gently pry the battery connector up from its socket on the logic board. First pry up the screw hole, then the top of the connector. Do not pry the sides.
[* black] Use a plastic opening tool to gently pry the battery connector up from its socket on the logic board. First pry up the screw hole, then the top of the connector. Do not pry the sides.
[* icon_caution] Be very careful to only pry up on the battery connector and not the socket on the logic board. If you pry up on the logic board socket, you may break it entirely.
[* black] Remove the metal clip covering the antenna connector.