Ga door naar hoofdinhoud

Wijzigingen in stap #2

Bewerken voor revher

Bewerking geweigerd door Jake Devincenzi

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Use a plastic opening tool to gently pry the battery connector up from its socket on the logic board.
[* icon_caution] Be very careful to only pry up on the battery connector and not the socket on the logic board. If you pry up on the logic board socket, you may break it entirely.
[* black] Remove the metal clip covering the antenna connector.
[* black] Once the battery is disconnected and if you only need to remove the rear camera, it is not necessary to remove the battery itself.
[* black] The oils on your fingers have the potential to cause wireless interference issues. Be careful to not use your fingers.