Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Marcos Isidro

Bewerking geweigerd door David Hodson

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* red] Remove the single 2.5 mm Phillips screw securing the battery connector to the logic board.
[* icon_note] Some devices may have two screws, one of which holds down the contact pad which is located above the screw indicated in red in the photo.
[* black] The second screw is not hidden below the small blank circle, so if you don't see the second screw, it's done.