Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Dennis Jengo

Bewerking geweigerd door David Hodson

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* red] Remove the single 2.5 mm Phillips screw securing the battery connector to the logic board.board.''' screw #3'''
[* red] Remove the single 2.5 mm Phillips screw securing the battery connector to the logic board.board.''' screw #3'''
[* icon_note] Some devices may have two screws, one of which holds down the contact pad which is located above the screw indicated in red in the photo.