Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor av8or2

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* red] Remove the single 2.5 mm Phillips screw securing the battery connector to the logic board. My 4s has two screws one of which holds down the contact pad which is located above the screw indicated in red in the photo.
[* red] Remove the single 2.5 mm Phillips screw securing the battery connector to the logic board. My 4s has two screws one of which holds down the contact pad which is located above the screw indicated in red in the photo.