Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Eric Spengler

Bewerking geweigerd door Walter Galan

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* icon_note] Before disassembling your iPhone, be sure it is powered off.off
[* icon_note] Before disassembling your iPhone, be sure it is powered off.off
[* black] Your iPhone 4 rear cover may have either two #000 Phillips screws or Apple's 5-Point "Pentalobe" screws ([http://guide-images.ifixit.net/igi/rlrF5h6UGBqN2VNq.huge|second image]). Check which screws you have, and ensure you also have the correct screwdriver in order to remove them.
[* red] Remove the two 3.6 mm Pentalobe or Phillips #000 screws next to the dock connector.
[* icon_reminder] During reassembly, we recommend you replace the 5-point screws with equivalent Phillips screws. Our [product|IF182-019|Liberation Kit] provides the tools and screws needed to replace the Pentalobe screws with Phillips screws.
[* icon_caution] The 5-Point Screwdriver should only be used once, as it has the potential to strip the screws.