Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor tomkarl

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* icon_reminder] Before disassembling your iPhone, be sure it is powered off. If your front panel is smashed and you cannot "slide to power off", hold the home button and the sleep button together until it powers down. Make sure you release the buttons before it restarts.
[* icon_reminder] Before disassembling your iPhone, be sure it is powered off. If your front panel is smashed and you cannot "slide to power off", hold the home button and the sleep button together until it powers down. Make sure you release the buttons before it restarts.
[* red] Remove the two 3.6 mm Phillips screws next to the dock connector.
[* icon_note] Apple has recently substituted the two Phillips screws with 5-Point "Pentalobe" screws. If your iPhone 4 has 5-Point "Pentalobe" screws instead of Phillips, please refer to the second picture.
[* red] Remove the two 3.6 mm Pentalobe screws next to the dock connector.
[* icon_reminder] During reassembly, we recommend you replace the 5-point screws with equivalent Phillips screws. Our [product|IF182-019|Liberation Kit] provides the tools and screws needed to replace the Pentalobe screws with Phillips screws.
[* icon_caution] The 5-Point Screwdriver should only be used once, as it has the potential to strip the screws.