Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie


Wijzigingen aan stap #1

Bewerking door Walter Galan

Wachtend op goedkeuring


Stap regels

[* icon_reminder] Before disassembling your iPhone, be sure your iPhone is powered off.
[* red] Remove the two 3.6 mm Phillips screws next to the dock connector.
[* icon_note] Apple has recently substituted the two Phillips screws with 5-Point "Pentalobe" screws. If your iPhone 4 has 5-Point "Pentalobe" screws instead of Phillips, please refer to the second picture.
[* red] Remove the two 3.6 mm Pentalobe screws next to the dock connector.
[* icon_reminder] During reassembly, we recommend you use the 5-Point Screwdriver to remove the 5-Point screws and replace them with the equivalent Phillips screws.
[* icon_caution] The 5-Point Screwdriver should only be used once as it has the potential to strip the screws.