Menu

Jouw instellingen

Mijn werkbank

Krijg snel toegang tot handleidingen, onderdelen en antwoorden voor jouw apparaten
Winkelwagen

Het lijkt erop dat je mandje leeg is

Doorblader onze winkel

Wijzigingen in stap #1

Bewerken voor adlerpe —

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* red] Remove the two 3.6 mm Phillips screws next to the dock connector.
[* icon_note] Apple has recently substituted the two Phillips screws with 5-Point "Pentalobe" screws. If your iPhone 4 has 5-Point "Pentalobe" screws instead of Phillips, please refer to the second picture.
[* red] Remove the two 3.6 mm Torx"Pentalobe" screws next to the dock connector.
[* red] Remove the two 3.6 mm Torx"Pentalobe" screws next to the dock connector.
[* icon_reminder] During reassembly, we recommend you use the 5-Point Screwdriver to remove the 5-Point screws and replace them with the equivalent Phillips screws.
[* icon_caution] The 5-Point Screwdriver should only be used once as it has the potential to strip the screws.