Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #2

Bewerking door David Hodson

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Unscrew three screws from the bottom of the iPod:
[* red] two 4.4 mm angled Phillips screws
[* yellow] a single 5.4 mm Phillips screw.
[* icon_note] These screws may not come out on their own, so be sure not to lose them when removing the retainer.
[*
black] Use an iPoda plastic opening tool to pry the click wheel connector off the logic board.
[* black] Remove the click wheel
metal retainer out from the Nanobottom of the iPod and remove it.
[* black] Unscrew three screws from the bottom of the iPod:
[* red] two 4.4 mm angled Phillips screws
[* yellow] a single 5.4 mm Phillips screw.
[* icon_note] These screws may not come out on their own, so be sure not to lose them when removing the retainer.
[*
black] Use an iPoda plastic opening tool to pry the click wheel connector off the logic board.
[* black] Remove the click wheel
metal retainer out from the Nanobottom of the iPod and remove it.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Geen vorige afbeelding

Toegevoegd

Afbeelding 3

Geen vorige afbeelding

Toegevoegd