Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #1

Bewerking door David Hodson

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] InsertUse a sharp razor blade between the edge of the click wheel and the outer case.
[* black] Gently rotate
heat gun to soften the razor blade towardadhesive underneath the backbottom cover of the iPod, prying the click wheel out of the outer caseiPod.
[* icon_caution] Be very gentle withUse a low heat setting and do not hold the razor blade. If you pryheat gun in place for too hard, you are likelylong to snapavoid melting the bladeplastic cover.
[* icon_caution] The outerblack] Use a plastic opening tool to pry the bottom cover from the case of the iPod Nano is very smooth. Be careful not to cut yourself when working with the sharp bladeand remove it.
[* black] InsertUse a sharp razor blade between the edge of the click wheel and the outer case.
[* black] Gently rotate
heat gun to soften the razor blade towardadhesive underneath the backbottom cover of the iPod, prying the click wheel out of the outer caseiPod.
[* icon_caution] Be very gentle withUse a low heat setting and do not hold the razor blade. If you pryheat gun in place for too hard, you are likelylong to snapavoid melting the bladeplastic cover.
[* icon_caution] The outerblack] Use a plastic opening tool to pry the bottom cover from the case of the iPod Nano is very smooth. Be careful not to cut yourself when working with the sharp bladeand remove it.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Oude versie

Nieuwe versie