Wijzigingen aan stap #1
Bewerken voor Arthur Shi —
Bewerking goedgekeurd door Arthur Shi
- Voor
- Na
- Ongewijzigd
Stap regels
| [* black] Remove the following screws securing the logic board to the rear case: | |
| [* red] Two 2.4 mm standoff screws | |
| - | [* icon_note] Standoff screws are best removed using |
| + | [* icon_note] Standoff screws are best removed using a [product|IF145-388-4|standoff screwdriver|new_window=true] or bit. |
| [* icon_caution] In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components. | |
| [* orange] One 2.1 mm Phillips #00 screw |