Ga door naar hoofdinhoud

Wijzigingen in stap #6

Bewerken voor Scott Head

Bewerking goedgekeurd door Scott Head

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* red] Remove the two 3.1 mm Phillips screws securing the iSight holder to the top of the display.
[* icon_note] Make sure to remove the screws securing the metal bracket to the edge of the display and not the screws in the iSight board itself.
[* icon_note] If you are replacing your screen with a new one, your part may not have these two screw holes. That's OK. You can still reassemble your computer without those screws in place.