Ga door naar hoofdinhoud

Wijzigingen in stap #3

Bewerken voor FixWiki

Bewerking goedgekeurd door Arthur Shi

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Lift up the right side of the clutch cover and guide the display data and iSight cables through the gap in the clutch cover.
[* black] Lift the clutch cover out of the display assembly.
[* icon_reminder] During reassembly, make sure not to pinch the backlight cable (with the white connectorconnector on the right side) when snapping the clutch cover back into place. This cable has two visible wires leading into the lower right section of the LCD display to the backlight. (The models with pink and white wires are usually longer and easier to pinch.)
[* icon_reminder] During reassembly, make sure not to pinch the backlight cable (with the white connectorconnector on the right side) when snapping the clutch cover back into place. This cable has two visible wires leading into the lower right section of the LCD display to the backlight. (The models with pink and white wires are usually longer and easier to pinch.)