Ga door naar hoofdinhoud

Wijzigingen aan stap #1

Bewerking door Walter Galan

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

-[* black] Orient the logic board so that the camera lens is face down.
-[* red] Disconnect the camera connector from its socket by prying it straight up with a spudger.
+[* icon_note] Orient the logic board so that the camera lens is face down.
+[* black] Disconnect the camera connector from its socket by prying it straight up with a spudger.
[* black] Remove the camera assembly.