Ga door naar hoofdinhoud

Wijzigingen in stap #2

Bewerken voor Jacob Pugsley

Bewerking goedgekeurd door Jacob Pugsley

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Remove screws from the battery area, noting the following:
[* green] These screws are on oversize clearing holes, but hold other components on the keyboard. You canIt is not recommended to remove them now, but you'll have parts loose and dropping out if you remove the keyboard, so you may want to waityet.
[* green] These screws are on oversize clearing holes, but hold other components on the keyboard. You canIt is not recommended to remove them now, but you'll have parts loose and dropping out if you remove the keyboard, so you may want to waityet.
[* orange] Two screws secure the optical drive: one in the battery compartment and one in the RAM compartment.
[* blue] With the screws removed, PUSH out thethe optical drive thruout through the opening at the BLUE arrow. You will need to remove the drive in order to have access to 2two more screws at the edge of the frame in the opening of the optical drive attached to the bezel of the keyboarddrive.
[* blue] With the screws removed, PUSH out thethe optical drive thruout through the opening at the BLUE arrow. You will need to remove the drive in order to have access to 2two more screws at the edge of the frame in the opening of the optical drive attached to the bezel of the keyboarddrive.