Ga door naar hoofdinhoud

Wijzigingen in stap #5

Bewerken voor Andrew Bookholt

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Slowly work your way across the lower edge of the front display bezel until it is free from the display assembly.
[* icon_caution] Be sure to pry up as far away from the LCD as possible, as it extends below the edge of the front display bezel.
[* black] When you get about half way across, pry up from the other side of the front display bezel's lower edge to ease the process.
[* black] Remove the front display bezel from the display assembly.
[* blackicon_note] To help the adhesive avoid losing is tackiness, do not excessively handle the adhesive and be sure to keep it clean until you are ready for installation.
[* blackicon_note] To help the adhesive avoid losing is tackiness, do not excessively handle the adhesive and be sure to keep it clean until you are ready for installation.