Ga door naar hoofdinhoud

Wijzigingen in stap #2

Bewerken voor Andrew Bookholt

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Insert wisdom hereUse the flat end of a spudger to pry the front display bezel off the top edge of the display assembly.
[* icon_note] It may be helpful to insert and twist the flat end of your spudger to enlarge the gap between the front & rear display bezels as you work your way around the edge of the display.
[* black] Continue separating until the top edge of the front display bezel is free from the display assembly
.
[* black] Insert wisdom hereUse the flat end of a spudger to pry the front display bezel off the top edge of the display assembly.
[* icon_note] It may be helpful to insert and twist the flat end of your spudger to enlarge the gap between the front & rear display bezels as you work your way around the edge of the display.
[* black] Continue separating until the top edge of the front display bezel is free from the display assembly
.