Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #4

Bewerking door Evan Noronha

Bewerking goedgekeurd door Evan Noronha

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Pull the home button end of the front panel assembly away from the rear case, using the top of the phone as a hinge.
[* icon_note] During the next few steps, until you remove the front panel assembly,black] Open the display to about a 90º angle, and lean it against something to keep it supported atpropped up while you're working on the phone.
[* black] Add
a 90º anglerubber band to keep the display securely in relationplace while you work. This prevents undue strain on the display cables.
[* icon_note] In a pinch, you can use an unopened canned beverage
to hold the rear casedisplay.
[* icon_note] During the next few steps, until you remove the front panel assembly,black] Open the display to about a 90º angle, and lean it against something to keep it supported atpropped up while you're working on the phone.
[* black] Add
a 90º anglerubber band to keep the display securely in relationplace while you work. This prevents undue strain on the display cables.
[* icon_note] In a pinch, you can use an unopened canned beverage
to hold the rear casedisplay.

Afbeelding 3

Geen vorige afbeelding

Toegevoegd