Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #14

Bewerking door Steinar Dahl

Bewerking geweigerd door Andrew Optimus Goldheart

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Finally, use a plastic opening tool to disconnect the display data cable connector.
[* icon_caution] When reassembling your phone, the display data cable may pop off the connector. This can result in white lines or a blank screen when powering your phone back on. If that happens, simply reconnect the cable and power cycle your phone. The best way to power cycle your phone is to [guide|29424|disconnect and reconnect the battery connector.|stepid=69596]
[* icon_caution] When reassembling your phone, it's very important that the cables are in the correct layer. Otherwise you can confuse the two cables with similiar connectors, and the result can be the damage of both the panel and the mainboard.