Ga door naar hoofdinhoud

Fix Your Stuff

Right to Repair

Parts & Tools

Wijzigingen aan stap #9

Bewerking door Sam Goldheart

Bewerking goedgekeurd door Sam Goldheart


Stap regels

[* icon_note] Lift the home button end of the front panel up to gain access to the connectors near the top of the phone.
[* black] While holding the front panel open at about a 90º angle, remove the following Phillips #000 screws securing the front panel assembly cable bracket to the logic board:
[* red] Three 1.2 mm screws
[* orange] One 1.5 mm screw
[* yellow] One 2.9 mm screw