Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #2

Bewerking door Vincent Benvin

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Remove the first flex-wire connection by inserting your thumbnail directly underneath the connection as shown. Will pry off easily.
[* black] Thisicon_reminder] This flex-wire connects the LCD logic board to the main logic board removed earlier.
[* blue] Remove the two other flex-wire connections at the top and bottom of the LCD logic board. Pry up on the respective connections as shown.
[* black] Square LCD logic board will detach now.
[* black] Thisicon_reminder] This flex-wire connects the LCD logic board to the main logic board removed earlier.
[* blue] Remove the two other flex-wire connections at the top and bottom of the LCD logic board. Pry up on the respective connections as shown.
[* black] Square LCD logic board will detach now.

Afbeelding 2

Oude versie

Nieuwe versie