Skip to main content

Wijzigingen aan stap #5

Bewerking door Jacob Pugsley

Bewerking goedgekeurd door Jacob Pugsley

Verwijderd
Toegevoegd
Ongewijzigd

Stapregels

[* black] Slide the heat sink assembly including the upper fan out by pulling it down and left simultaneously.
[* icon_caution] When reinstalling the heat sink, ensure it is thoroughly cleaned and the thermal paste (or pads pads) are replaced to ensure proper thermal contact with the devices on the logic board to prevent thermal issuesboard.
[* icon_caution] When reinstalling the heat sink, ensure it is thoroughly cleaned and the thermal paste (or pads pads) are replaced to ensure proper thermal contact with the devices on the logic board to prevent thermal issuesboard.