Skip to main content

Wijzigingen aan stap #5

Bewerking door Richdave

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stapregels

[* icon_cautionred] Disconnect the wire attached to the largetop fan cable from the motherboard BEFORE taking the fan outlogic board.
[* black] Slide the heat sink assembly including the upper fan compartment out by pulling it down and then left simultaneously.
[* icon_caution] When reinstalling heat sink, ensure it is thoroughly cleaned and the thermal paste (or pads ) are replaced to ensure proper thermal contact with the devices on the logic board to prevent thermal issues.
[* icon_cautionred] Disconnect the wire attached to the largetop fan cable from the motherboard BEFORE taking the fan outlogic board.
[* black] Slide the heat sink assembly including the upper fan compartment out by pulling it down and then left simultaneously.
[* icon_caution] When reinstalling heat sink, ensure it is thoroughly cleaned and the thermal paste (or pads ) are replaced to ensure proper thermal contact with the devices on the logic board to prevent thermal issues.