Skip to main content

Wijzigingen aan stap #3

Bewerking door Richdave

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stapregels

[* icon_caution] Lift the plate and lower fan off the heat sink being careful not to damage the lower fan cablecable, which is attached to the logic boardmotherboard.
[* green] Disconnect the lower fan connector from the logic boardmotherboard.
[* icon_caution] Lift the plate and lower fan off the heat sink being careful not to damage the lower fan cablecable, which is attached to the logic boardmotherboard.
[* green] Disconnect the lower fan connector from the logic boardmotherboard.
[* black] Remove the metal plate and lower fan.
[* icon_note] The lower fan will easily separate from the metal plateplate.
[* icon_note] The lower fan will easily separate from the metal plateplate.