Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #3

Bewerking door Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Voor
Na
Ongewijzigd

Stap regels

[* icon_caution] Do not attempt to fully remove the LCD. It is still connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end.
[* black] Use the flat end of a spudger to pry the LCD out of its recess just enough to grab it with your fingers.
[* black] Flip the iPad LCD like a page in a book, lifting near the camera and turning it over the home button end of the rear case.
[* icon_caution] Be gentle and keep an eye on the LCD cables as you flip the display over.
[* black] Lay the LCD on its face to allow access to the display cables.
[* icon_note] Set the LCD down on a soft, clean, lint-free surface.