Ga door naar hoofdinhoud

Wijzigingen aan stap #4

Bewerking door Angel

Bewerking goedgekeurd door Mariana

Voor
Na
Ongewijzigd

Stap regels

[* red] Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board.
-[* icon_note] To reduce the risk of a short, you can use a battery isolation pick to disconnect the battery.
+[* icon_note] To reduce the risk of a short, you can use a battery isolation pick to isolate the battery.
[* black] Slide a battery isolation pick underneath the battery connector area of the logic board, and leave it in place while you work.