iPad Air LTE LCD Replacement stap #4 geschiedenis

Wijzigingen aan stap #4

Bewerking door Jeff Suovanen — di 20 jun 2017 16:15:42 MST

Bewerking goedgekeurd door Jeff Suovanen

	[* red] Remove the single 2.3 mm Phillips screw securing the battery connector to the logic board.
-	[* black] Insert a battery isolation pick underneath the battery connector to disconnect it from the logic board.
+	[* icon_note] To reduce the risk of a short, you can use a battery isolation pick to disconnect the battery.
+	[* black] Slide a battery isolation pick underneath the battery connector area of the logic board, and leave it in place while you work.