Ga door naar hoofdinhoud

Wijzigingen aan stap #4

Bewerking door Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Voor
Na
Ongewijzigd

Stap regels

[* black] Remove the front panel assembly.
- [* icon_note] If you are replacing the digitizer, be sure to clean off any leftover adhesive. Leftover adhesive prevents the new digitizer from adhering to the device.
[* icon_caution] If the home button ribbon cable sticks to the iPad's rear case, don't try to force it. Gently peel it off the case using a pair of tweezers, and then you can fully remove the front panel assembly.
[* icon_caution] To avoid digitizer issues, be sure the two metallic pads of tape near the home button are transferred to the new display. If your iPad did not have metallic pads, and you are having digitizer issues, you can place a thin piece of tape over the metallic areas near the home button.