Ga door naar hoofdinhoud

Wijzigingen aan stap #8

Bewerking door mayer

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

-[* black] Remove the Phillips screw securing the optical drive.
+[* black] Remove the 2.8 mm Phillips screw securing the optical drive.
[* icon_note] The Bluetooth cable may be covering the screw; carefully push it aside before removing the screw.
[* icon_reminder] Do not over-tighten this screw when re-mounting. You could break the plastic enclosure.
[* black] After removing the screw, push the metal tab backwards, towards the fan, to release the front of the optical drive.