Ga door naar hoofdinhoud

Wijzigingen aan stap #3

Bewerking door oldturkey03

Bewerking goedgekeurd door oldturkey03

Voor
Na
Ongewijzigd

Stap regels

-[* black] Insert wisdom here.
+[* black] Insert the new joystick into the circuit board. Make sure it is properly seated and that all the contacts line up with the holes in the circuit board.
+[* black] Solder all the contacts to the board.
+[* black] Here is the board after the repair. All that is left is to clean off the old flux with some isopropyl alcohol.