Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #5

Bewerking door Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Voor
Na
Ongewijzigd

Stap regels

[* black] Apply a small amountfew drops of adhesive remover (approximately 1 ml) evenly under the edge of the rightmost battery cell.
[* icon_note] You don't need to use very much. The small bottle contains more than twice the amount of solvent needed to remove all the battery cells.
[* black] Apply a small amountfew drops of adhesive remover (approximately 1 ml) evenly under the edge of the rightmost battery cell.
[* icon_note] You don't need to use very much. The small bottle contains more than twice the amount of solvent needed to remove all the battery cells.
[* black] Wait 2-3 minutes for the liquid adhesive remover to penetrate underneath the battery cell before you proceed to the next step.
[* icon_caution] DoUse more adhesive remover if needed, but do not apply more than 1 ml of the adhesive removera few drops at a time. Using too much can allow the adhesive remover to make its way to the backside of your keyboard and potentially damage it.
[* icon_caution] DoUse more adhesive remover if needed, but do not apply more than 1 ml of the adhesive removera few drops at a time. Using too much can allow the adhesive remover to make its way to the backside of your keyboard and potentially damage it.

Afbeelding 1

Oude versie

Nieuwe versie