Skip to main content

Wijzigingen aan stap #3

Bewerking door Walter Galan

Bewerking goedgekeurd door Walter Galan

Verwijderd
Toegevoegd
Ongewijzigd

Stapregels

[* black] Use the flat end of a spudger to pop the I/O board connector straight up off its socket on the I/O board.
[* icon_caution] Be careful to only pry up on the cable connector, not'''not''' on the socket itself or you risk damaging your I/O board.
[* icon_caution] Be careful to only pry up on the cable connector, not'''not''' on the socket itself or you risk damaging your I/O board.
[* black] Push the I/O board cable up to bend it out of the way.