Ga door naar hoofdinhoud

Wijzigingen aan stap #2

Bewerking door Walter Galan

Bewerking goedgekeurd door Walter Galan

Voor
Na
Ongewijzigd

Stap regels

[* black] Use the flat end of a spudger to pop the I/O board connector straight up off its socket on the logic board.
-[* icon_caution] Be careful to only pry up on the I/O board cable, not on the socket itself or you risk damaging your logic board.
+[* icon_caution] Be careful to only pry up on the I/O board cable, ***not*** on the socket itself or you risk damaging your logic board.