Repareer je spullen Gemeenschap Winkel

Wijzigingen aan stap #11

Bewerken voor Kris Rodriguez —

Bewerking goedgekeurd door Kris Rodriguez

Voor
Na
Ongewijzigd

Stap regels

[title] Make contact!
[* black] Align the battery housing and circuit board.
-[* black] Take note of where the spring contacts will connect to the charging pins, where the grooves will connect to the motor contacts at each end.
-[* black] With all wires clear it should push and pop in quite easily. If it is at all difficult something is in the way. Do not force - take it out and have a look.
+[* icon_note] Take note of where the spring contacts will connect to the charging pins, where the grooves will connect to the motor contacts at each end.
+[* icon_note] With all wires clear it should push and pop in quite easily. If it is at all difficult something is in the way. Do not force - take it out and have a look.