Skip to main content

Wijzigingen aan stap #4

Bewerking door David Smout

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stapregels

[* black] Use a #1 Phillips to remove the two screws attaching the right side of the hard drive to the plastic framework. You'll need to angle the screwdriver down to get access to the lower right screwscrew or remove the tape covering the access hole opposite this screw, remember to put the tape back as this will affect the airflow for cooling. Be sure to apply steady force to the screws and turn slowly so as not to strip them.
[* black] Use a #1 Phillips to remove the two screws attaching the right side of the hard drive to the plastic framework. You'll need to angle the screwdriver down to get access to the lower right screwscrew or remove the tape covering the access hole opposite this screw, remember to put the tape back as this will affect the airflow for cooling. Be sure to apply steady force to the screws and turn slowly so as not to strip them.