Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen in deze stap

Bewerking door dwilbank

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] SLOWLY begin to lift the keyboard until you can see the ribbon cable attaching it to the computer. Disconnect this cable before completely removing the keyboard.
[* black] Before pulling out the ribbon, there is a tiny brown locking clip with two tangs you need to deal with. It is very hard to see. You will only see the two brown edge tabs. Slide both tabs a fraction of an inch towards the rear of the computer (the clip is not supposed to come loose), then the ribbon will slide free. When you put the ribbon back in place, make sure the clip is loose, then slide it back towards the front of the computer when you want to lock the ribbon into place.